Do you measure up?
Comply with new 2010 Building Regulations
The latest Building Regulations, Domestic Compliance Guide, effective from 1st October requires all new and refurbishment ventilation installations that are notifiable to Building Control, under the 2010 planning requirements should be commissioned on-site with a document submitted to the BCO within 5 days.
The LCA301 Anemometer Kit enables on-site measurements to be taken and air volumes calculated for reporting to building control
Simple one handed operation and a large clear LCD ensures that velocity or volume flow reading of air measurement is quick, reliable and accurate. LCA301 operates with the advantage of the latest microchip technology with a variable time base constantly updating the average readings. This allows the user to traverse large grilles and ducts in one sweep and to have the average value displayed automatically, alternatively it can be used with an Aircone for "one-shot" measurements. Another advanced ferature is the compensation factor built into each instrument to help overcome the friction of the bearings at lower velocities so ensuring even greater accuracy. All this is complemented by a self diagnostic function which can automatically test that the unit is functioning properly
- Hand held air flow mesurement
- Read at Grilles and Air Valves
- Supply or extract
- Displays flow, l/sec, m3/hr or velocity, m/sec
- Supplied with 285 x 235mm Aircone
- Case, Battery and DKD certificate of calibration traceable to UKAS included
Supplied with the LCA301 is a 285 x 235mm Aircone to attach to the vane sensor. Aircone flow hoods are the quick and accurate method to maximise the usefulness of the Airflow Anemometer
Commissioning and balancing of air volume flow is immediately possible at grilles, diffusers, and air valves. The hood is equally suitable for measuring ventilation flow rates for both extract and supply air.
Simply rotate the vane sensor 180 degrees to point into the direction of flow. Manufactured in hard wearing ABS for the rigours of on-site use, is extremely lightweight allowing one man operation for long periods and one handed testing up ladders etc.
Both the instrument and the aircone is supplied in a protective carry-case.
